Sealant and Adhesive Remover

The Sealant and Adhesive Remover is a stripper for the workshop and maintenance. It loosens old flat gaskets, sealing compounds and adhesive residue that could otherwise only be removed mechanically with great effort and damage to the sealing surface. Coatings and paint residue are also softened and can then be removed.

In use, apply the remover to the area to be cleaned and allow it to act. The agent softens the residue so that it can be removed with a scraper or cloth. After cleaning, the surface should be treated with a cleaner so that the new gasket or bond adheres cleanly. Check compatibility with plastics and paints beforehand on a concealed area.

The product is aimed at vehicle workshops, engine reconditioning, mechanical engineering and assembly companies that need to reseal housings, covers and flanges or separate bonded components. For specialist retailers, the Sealant and Adhesive Remover is a sensible addition to flat gaskets and adhesives.

1. Remove loose gasket residue and coarse dirt mechanically.
2. Shake the can and spray the remover evenly onto the residue.
3. Allow to act until the gasket or adhesive softens.
4. Remove the loosened residue with a plastic scraper or cloth; repeat if necessary.
5. Degrease the surface with a cleaner and allow it to dry before resealing. Test plastics and paints beforehand.

The information on the label and the safety data sheet is authoritative.