Mould Release Agent

The mould release agent is a release agent for the plastics industry. It is sprayed thinly onto the surface of moulds and tools and forms a release film between tool and plastic. This allows injection-moulded, pressed and cast parts to be removed more easily after moulding, without sticking to the tool or being damaged during ejection.

In use, the release agent shortens downtime caused by stuck parts, protects mould surfaces and eases start-up after tool changes or cleaning. The film is applied sparingly and evenly so that the part surface remains clean and subsequent work steps are not impaired. Compatibility with the respective plastic and with later processing steps such as painting or bonding should be checked beforehand.

Users are injection moulders, plastics processors, mould makers, toolmakers and dealers in manufacturing supplies. On request, we supply the mould release agent under your own brand with your label.

1. Clean the mould surface and remove residues of previous release agents or plastic residues.
2. Shake the can well and spray the release agent thinly and evenly from a distance.
3. Allow to flash off briefly before the mould is loaded or injected.
4. Repeat the application as required when parts start to stick again.

The information on the label and safety data sheet is authoritative.